Ventilating Tiles & Slates Klober Top Vent ventilation tiles are designed to match the colours and profiles of most popular roof products. Injection moulded for a precise match to the original tile or slate, they make an unobtrusive appearance in the roof line.
Universal Vent Tile A ventilating tile that suits most interlocking/plain tile profiles. Available in Terracotta, Slate Grey or Brown. Fully wind tunnel tested and suitable for roof pitches over 17.5°. Provides 15,000 square millimetres effective vent area. Uni-Plain Tile Vent Design fits with most manufacturers concrete and clay plain tiles. Simple to install as no tile or batten cutting is necessary. Provides 6,000 square millimetres effective vent area. Uni-Line Slate Vent Innovative, in-line ventilation slate for pitches of 22.5° and above. Suits both 600mm x 300mm and 500mm x 250mm double lap man-made or natural roof slates. Provides 6,500 square millimetres effective vent area. Small Slate Vent Available with or without an integral down pipe. Low profile design to blend with the roof line. Clearly marked for cutting to various slate sizes. Provides 4,500 square millimetres effective vent area. 10K Slate Vent Unobtrusive, low profile design to blend with the roof line. Slate Grey cap blends with most man-made or natural slates. Clearly marked for cutting to various sizes. Provides 10,000 square millimetres effective vent area. Large Slate Vent Fully wind tunnel tested. Low profile design is unobtrusive on the roof line. Slate Grey cap blends with most man-made or natural slates. Fits perfectly with adjacent slates. Provides 14,000 square millimetres effective vent area. 49 Vent Tile For Redland 49, Vanguard, Ludlow Plus and Standard Pattern tiles. Fully wind tunnel tested. Provides 15,000 square millimetres effective vent area.